Association between oral health status and occlusal bite force in young adults.

Background/purpose: Oral health is related to general health and a person's overall well-being. The aim of the present study was to explore the association between oral health status and bite force among young adults. Materials and methods: Maximum bite force (MBF) was measured using Dental Prescale II in conjunction with a pressure-sensitive film and bite force analyzer in 40 young adults aged 20 to 40. Supragingival dental plaque was collected and cultured. Plaque weight, pH, and colony counts were assessed. The decayed, missing, and filled teeth index (DMFT) and body mass index (BMI) were recorded. Results: Bite force was negatively correlated with the number of missing teeth and the sum of missing and filled teeth. When the filled-to-remaining-teeth ratio (F/R ratio) was less than 8%, the bite force was significantly higher compared to an F/R ratio of 8-25%. Additionally, the amount of total bacteria was positively correlated with total bite force, and the quantity of Streptococcus mutans (S. mutans) along with total bacteria was positively correlated with bite force in the molar region (∗P < 0.05). The molar region predominantly contributed to bite force. Conclusion: Elevated levels of cariogenic bacteria may increase the risk of tooth loss, subsequently leading to reduced bite force. This reduction in bite force can further impact the efficiency of chewing function and, consequently, the quality of life. An F/R ratio above 8% could be easily calculated clinically and could serve as a guide to identify patients, particularly young adults, at risk of reduced bite force.

Symptoms trend and challenges in dental practice during delta variance COVID-19 pandemic in Indonesia: Google Trends Analysis.

Background: The COVID-19 pandemic has grown to be a serious issue on a global scale. Dental care is one of the industries affected by COVID-19. The surveillance utilizing lifetime data, however, is still not clear. The purpose of this study was to use Google Trends (GT) analysis to examine symptom trends and challenges during the COVID-19 outbreak in Indonesia. Methods: Covid-19 cases retrieve from Our World in Data. The cases were collected between 1 April 2021-30 September 2021. The GT was used to discover Indonesian relative search volume (RSVs) covering the timeframe of the first outbreak covid-19 pandemic in Indonesia on 1 March 2020 until 13 February 2022. The duration of the search was chosen to reflect the relative popularity of the keywords "symptoms and dentistry practice challenge-related terms" and "coronavirus". Results: We observed that there was a significant and positive correlation between the COVID-19 daily case using GT RSV data and the COVID-19 case from Our World in Data. The COVID-19 daily case had a strong correlation with search terms related to symptoms (such as fever, sore throat, flu, toothache, and cough), drugs (such as ibuprofen, paracetamol, demacolin, bodrex, and antibiotic), and health management (such as self-isolation and telemedicine). Conclusion: Using GT may be helpful to observe the current symptoms trends as well as its challenge tendencies as a surveillance tool for a continuing pandemic like COVID-19. GT should be considered and used as it has the potential to be a powerful digital epidemiology tool that can provide more insight into disease dynamics.

Peri-Implant Marginal Bone Changes around Dental Implants with Platform-Switched and Platform-Matched Abutments: A Retrospective 5-Year Radiographic Evaluation.

Preserving the marginal bone level (MBL) is essential for the long-term success of dental implant therapy, and bone remodeling around dental implants is considered to vary with time. Numerous studies comparing the platform-switching (PS) and platform-matching (PM) dental implants have indicated that PS dental implants showed a lesser reduction for the MBL, and the majority of them had a relatively short period. This study aimed to evaluate vertical and horizontal bone defects by using digital periapical radiographs to examine the changes in MBL around PM and PS dental implants over 5 years after functional loading. The vertical MBL (vMBL) was measured from the implant-abutment junction to the first bone-to-implant contact. The horizontal MBL (hMBL) was measured from the implant-abutment junction to the bone crest. All data were presented as means ± standard errors. Paired and independent t-tests with Welch's correction were used to analyze the data. A total of 61 dental implants in 38 patients after 5 years of functional loading were evaluated. Over time, PS dental implants were more likely to gain bone; by contrast, PM dental implants were more likely to lose bone during the observation time. Changes in vMBL for PS dental implants were significantly less than those for PM dental implants at 1-year (p = 0.045), 3-year (p = 0.021), and 5-year (p = 0.010) loading. Likewise, changes in hMBL for PS dental implants were significantly smaller than in those for PM dental implants at 3-year (p = 0.021) and 5-year (p = 0.006) loading; however, the changes were minimal in both approaches. PS dental implants had a significant increment in the percentage of bone integration, whereas that for PM dental implants dropped over time, with no significance. In PS dental implants that occlude with natural teeth, vertical and horizontal bone gain was observed, and it was significant at 3 years (p = 0.023). A significant horizontal bone gain was observed in the opposing natural teeth at 3-year (p = 0.002) and 5-year loading (p = 0.002). The PS concept appears to preserve more MBL around dental implants by stabilizing the vMBL and hMBL over a 5-year period. A minimal marginal bone change was detected in both concepts. The opposing natural teeth at PS dental implants showed a favorable effect on marginal bone tissues.

Marginal Bone Level Evaluation of Fixed Partial Dental Prostheses Using Preformed Stock versus CAD/CAM Customized Abutments.

Background: The maintenance of marginal bone levels around dental implants is an important criterion for evaluating the success of implants. Although computer-aided design/computer-aided manufacturing (CAD/CAM) customized abutments (CAs) provide more flexible solutions, compared with the original preformed stock abutments (PAs), there are dimensional tolerances and underlying drawbacks in the production of CAD/CAM CAs, which may change the tightness and seamless connection between fixtures and abutments set by the manufacturer and then affect the long-term stability of the abutments. This study aimed to examine the change in both mesial and distal bone levels using digital periapical radiographs to evaluate the difference between CAD/CAM CAs and original PAs.Material and methods: Radiographs were taken before delivery; after functional loading for 1 month; and after 3, 6, and 12 months; and the vertical marginal bone levels (vMBLs) of both the mesial and distal surrounding implant bones were measured. All data are presented as means ± standard errors and were analyzed using Student's t-test. A p-value < 0.05 was judged to represent a significant difference. Results: A total of 57 implants in 50 patients were divided into 22 CAD/CAM CAs and 35 original stock abutments. The PAs appeared to have a more stable bone level. By contrast, the amount of bone level change in the CAs was higher than that in the PAs. The change in the vMBL of the CAs was significantly more than that of the PAs after functional loading for 1 month (p = 0.006), 3 months (p = 0.013), 6 months (p = 0.014), and 12 months (p = 0.002). In contrast, the distal marginal bone level was lower than the mesial marginal bone level in any period. Nevertheless, the bone levels of the CAs and PAs in any period were comparable with no significant difference. Conclusions: Significant differences were found between the mesial and distal bone levels in the PAs. The CAD/CAM CAs showed a significantly greater bone level change than the original stock abutments after functional loading.

Marginal Bone Loss around Implant-Retaining Overdentures versus Implant-Supported Fixed Prostheses 12-Month Follow-Up: A Retrospective Study.

Few studies have compared marginal bone loss (MBL) around implant-retaining overdentures (IODs) vs. implant-supported fixed prostheses (FPs). This study evaluated the mean MBL and radiographic bone-implant interface contact (r-BIIC) around IODs and implant-supported FPs. We also investigated osseointegration and MBL around non-submerged dental implants. We measured the changes between the MBL in the mesial and distal sites immediately after prosthetic delivery and after one year. The mean MBL and its changes in the IOD group were significantly higher. The mean percentage of r-BIIC was significantly higher in the FP group. MBL and its changes in males were significantly higher in the IOD group. The percentage of r-BIIC was significantly higher in the FP group. MBL in the lower site in the IOD group was significantly higher. Regarding MBL, the location of the implant was the only significant factor in the IOD group, while gender was the only significant predictor in the FP group. Regarding the r-BIIC percentage, gender was a significant factor in the FP group. We concluded that non-submerged dental implants restored with FPs and IODs maintained stable bone remodeling one year after prosthetic delivery.

Magnesium Modified ß-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo.

In vitro, in vivo, and clinical studies have shown how the physicochemical and biological properties of ß-tricalcium phosphate (ß-TCP) work in bone regeneration. This study aimed to improve the properties of ß-TCP by achieving optimum surface and bulk ß-TCP chemical/physical properties through the hydrothermal addition of magnesium (Mg) and to later establish the biocompatibility of ß-TCP/Mg for bone grafting and tissue engineering treatments. Multiple in vitro and in vivo analyses were used to complete ß-TCP/Mg physicochemical and biological characterization. The addition of MgO brought about a modest rise in the number of ß-TCP surface particles, indicating improvements in alkaline phosphatase (ALP) activity on day 21 (p < 0.05) and in the WST-1assay on all days (p < 0.05), with a corresponding increase in the upregulation of ALP and bone sialoprotein. SEM analyses stated that the surfaces of the ß-TCP particles were not altered after the addition of Mg. Micro-CT and histomorphometric analysis from rabbit calvaria critical defects resulted in ß-TCP/Mg managing to reform more new bone than the control defects and ß-TCP control at 2, 6, and 8 weeks (* p ≤ 0.05, ** p ≤ 0.01, *** p ≤ 0.001, and **** p ≤ 0.0001). The hydrothermal addition of MgO to the ß-TCP surfaces ameliorated its biocompatibility without altering its surface roughness resulting from the elemental composition while enhancing cell viability and proliferation, inducing more bone regeneration by osteoconduction in vivo and osteoblastic differentiation in vitro.

Effect of Opposite Tooth Condition on Marginal Bone Loss around Submerged Dental Implants: A Retrospective Study with a 3-Year Follow-Up.

BACKGROUND: The objective of this study was to evaluate the effects of opposite tooth conditions on change in marginal bone level (MBL) around submerged dental implants. MATERIALS AND METHODS: The study included healthy patients with one or two implants. Structures opposite implants were either natural teeth (NT) or fixed restorations (FRs). MBLs were measured on digital periapical radiographs at the mesial and distal aspects of each implant. RESULTS: Sixty implants were inserted by the 3-year follow-up. Mean MBLs for NT were 0.21 ± 0.33 mm before prosthetic loading and 0.30 ± 0.41 mm 3 years later (p = 0.001). Mean MBLs with FRs were 0.36 ± 0.45 mm before loading and 0.53 ± 0.50 mm 3 years later (p < 0.001). Changes in mean MBL from the 6-month follow-up to the 1- and 3-year follow-ups were statistically significant (p < 0.01) for implants opposite NT. However, changes in mean MBL from the 6-month follow-up to the 1-year (p = 0.161) and 3-year follow-ups (p = 1.000) were not significant for implants opposite FRs. Between baseline and the 3-year follow-up, MBL change was relatively small and did not differ regarding NT and FRs. CONCLUSION: Bone loss was greater if submerged dental implants were opposed by FRs. MBLs around submerged implants continued to change after 3 years if NT opposed implants.

Guided Tissue Regeneration Treatment Yields Better Results in Class II Furcations in the Mandible Than in the Maxilla: A Retrospective Study.

Absorbable porcine collagen membrane with a bovine bone graft can be considered for regenerative treatment in periodontal class II furcation defects. We evaluated the clinical efficacy of guided tissue regeneration (GTR) treatment with bovine bone xenograft and a porcine collagen membrane in molars with class II furcations. Probing depth (PD), clinical attachment level (CAL), and bone level (BL) were recorded at baseline and at 3, 6, and 9 months postoperatively. Thirty class II furcation defects from the lower and upper molars were assessed. Significant improvements in PD and CAL were observed from baseline to 9 months in all groups (p < 0.01). BL improved in all groups except group A in the upper molars in radiographic assessment (p < 0.05). The lower and upper molars showed PD reduction of 50.5% ± 7.44% and 46.2% ± 11.2%, respectively, at 9 months (p = 0.044). In furcations of 1-3 mm, the lower and upper molars showed PD reductions of 51.2% ± 4.49% and 36.5% ± 16.14%, respectively (p = 0.035). The lower and upper molars showed a CAL gain of 51.1% ± 4.64% and 33.6% ± 18.8%, respectively (p = 0.037). Thus, GTR with bovine bone graft and porcine collagen membrane yielded good results in class II furcations, with better results in the lower than in the upper molars.